活性染料牢度提升剂 有效防止染料脱落后二次沾色

 

活性染料牢度提升剂HOLP**ON® Power Clean 是适用于活性染料纤维素纤维进行染色、印花、或轧染等工艺的色牢度提升皂洗剂，能够有效的去除活性染料染色后，织物表面所残存的浮色染料，有效的提高面料的耐水、皂洗、耐汗渍等色牢度检测项目等级。同时具备优良的防沾色性能，可以有效防止染料脱落后二次沾色。
 

物化性能           

外观                          白色粉体

离子型                       阴离子

pH                             碱性

溶解性                       易溶于水

使用方法

本产品适用于各种印染加工设备。其用量可参照下面条件试验后使用

化料时建议使用40-50℃温水进行溶解,1:10稀释，搅拌均匀。

.浸染后皂洗

常规皂洗

第 一道 皂洗粉0.2-0.5g/l，HOLP**ON® Power Clean 0.1-0.2g/l 90-98℃×15-20分钟

第二道HOLP**ON® Power Clean 0.1-0.2g/l，70-85℃×10-20分钟，2道皂洗，热水洗，水洗。

.连续染色后皂洗

Power Clean 0.5g/l-1.5g/l   80-85℃×1-2分钟 ，2道皂洗，热水洗，水洗
 

.可以有效去除面料上未上染的活性染料，提升色牢度

.随着用量的增加，皂洗液可接近无色，染料脱落少

.有效的而减少皂洗次数和时长

.产品可适用于筒纱染色
 

.避免阳光直射密闭保存在室内阴暗通风处（0-35℃下保存），使用后记得及时封口避免出现结块现象、

.不可直接将稀释液倒在织物上

.不可将其置于阳光暴晒处或其他高湿高热处。

重要声明:以上数据和结果基于浙江福尔普生新型材料有限公司目前拥有的认识和经验以及受限的实验室条件,仅供参考，敬请客户根据自身条件通过试验加以确认。

 

 

 

 

 

 

Color Fastness Promoter for Reactive Dyes

HOLP**ON® Power Clean

 

Power Clean is a color fastness improver suitable for dyeing, printing, pad dyeing and other processes of reactive dye for cellulose fiber. It can effectively remove the residual floating dye on the fabric surface after reactive dye dyeing, and effectively improve the color fastness to water, soaping, and sweat. At the same time, it has excellent anti-staining performance, which can effectively prevent the dye from secondary staining after falling off.

 

Physical & chemical properties:             

Appearance:      White powder

Ionicity:          Anionic

pH:              Alkaline

Solubility:        Soluble in water    

        

Usage:

This product is suitable for all kinds of dyeing equipment.

Dosage: 

It can be used after the test according to the following conditions：

It is recommended to use 40-50 ℃ warm water for dissolution, 1:10 dilution, and evenly mixing.

Soaping after dyeing:

Conventional soaping

First step: soap powder 0.2-0.5g/L, HOLP**ON® Power Clean 0.1-0.2g/l ,90-98 ℃ × 15-20min

Second step:HOLP**ON® Power Clean 0.1-0.2g/l , 70-85 ℃× 10-20min, soaping twice, hot water washing and water washing.

Soaping after continuous dyeing:

HOLP**ON® Power Clean : 0.5g/l-1.5g/l, 80-85 ℃ × 1-2 minutes, soaping twice, hot water washing, water washing.

 

Characteristics:

1. It can effectively remove the undyed reactive dyes on the fabric and improve the color fastness.

2. With the increase of the dosage, the soaping solution can be almost colorless, and the dye will fall off little.

3. Effectively reduces the times and duration of soaping

4. The product can be used for cone yarn dyeing

 

Storage and attentions:

1. Avoid direct sunlight and store in a dark and ventilated place (0-35 ℃), and remember to seal it in time after use to avoid caking

2. Do not pour the diluted solution directly on the fabric

3. Do not place it in direct sunshine or other places with high humidity and heat.